What does Steam require for a trailer file?
A .mov, .wmv or .mp4 file, preferably H.264 video with AAC audio, up to 1920 x 1080. Valve asks for a high bit rate of 5,000 Kbps or more and a frame rate of 30 or 60 fps. Steam reduces the audio to stereo when it transcodes the file.
Upload early. Valve processes trailers first in, first out, and a delete and new upload puts the trailer at the back of the queue. You cannot release the game while a trailer still converts. Most failed uploads have an unusual resolution or audio sample rate.
| Setting | Valve guidance |
|---|---|
| Container | .mov, .wmv or .mp4 |
| Codec | H.264 video and AAC audio preferred |
| Resolution | Up to 1920 x 1080; 16:9 preferred, 4:3 accepted |
| Frame rate | 30/29.97 or 60/59.94 fps |
| Bit rate | 5,000+ Kbps |
| Audio sample rate | 44 kHz or 48 kHz |
| Custom thumbnail | A frame from the video, 1920 x 1080, .jpg or .png |
Sources: Steamworks Trailers documentation.
What should the first seconds of a Steam trailer show?
The game being played. Valve highly recommends that the first trailer is primarily gameplay, with HUD elements visible, because the HUD tells a viewer what kind of game it is. Valve also says the Discovery Queue may give you less than 10 seconds to make an impression.
Trailer editors say the same. Derek Lieu, who cut trailers for Firewatch and Subnautica, told GameDiscoverCo that the first trailer should be gameplay, with story and cinematics only as support. Simon Carless warned that viewers do not wait 15 to 30 seconds for gameplay to start. Lieu also asks for no logos and no slow cinematic pans, because viewers were most impatient with them.
Many viewers skip ahead. Carless cites research by Chris Zukowski that many people click through the progress bar to find raw gameplay. So every point on the timeline must show play, not only the start.
Sources: Steamworks Trailers documentation; GameDiscoverCo (19 September 2022); Game Developer, Derek Lieu (19 April 2021); Game World Observer (22 September 2022).
How long should a Steam trailer be?
Valve sets no length limit. For a simple store page trailer, Derek Lieu suggests 90 to 180 seconds, so a viewer who clicks through the progress bar still lands on gameplay. Shorter is fine when the game has less content.
Keep each shot short. Lieu suggests about 3 to 5 seconds a shot, and says you do not want to show the same thing more than three times. Show the full game loop once for a long loop, or several times for a short loop such as a platformer level.
The first trailer also feeds other places. Steam makes microtrailers from it: six-second loops built from six one-second clips of the first visible trailer. You cannot edit them, so a first trailer with menus or logos gives weak microtrailers.
Sources: Steamworks Trailers documentation; Game Developer, Derek Lieu (19 April 2021).
How many trailers should the page have, and in which order?
One or two good ones, with the gameplay trailer first. Steam shows the first two valid trailers before any screenshots, so those two slots decide what most visitors see. Valve sorts trailers into four types: General or Cinematic, Teaser, Gameplay, and Interview or Dev Diary.
Do not stack trailers. GameDiscoverCo shows pages with many trailers as a negative example, and calls it unwise to keep old trailers on the page forever. Put a story trailer or a dev diary after the gameplay trailer, if you have one.
For more than one language, set each trailer to show for its language setting, and make the English trailer the base video. For a PEGI or ESRB rated video, you can limit it to some countries with two-letter country codes.
Sources: Steamworks Trailers documentation; GameDiscoverCo (19 September 2022).
How do I make a trailer work with no sound?
Tell the story with pictures and short on-screen words. Valve tells developers to plan for viewers who watch muted. Lieu also notes that many viewers never turn the sound on. Keep the HUD on, use clear shots, and show the result of each player action in the frame.
Pick the thumbnail with care. Steam makes a 600 x 380 poster and a 232 x 130 thumbnail for you. A custom image must be a frame from the video. Valve asks for a frame with unique content and no text.
Sources: Steamworks Trailers documentation; Game Developer, Derek Lieu (19 April 2021).
How do I make a simple store page trailer?
Record clean gameplay, cut it into short shots, and put the best play at the start. This is a minimum trailer for the store page, not for a launch announcement.
- Record 1080p gameplay with the HUD on, at 30 or 60 fps, with no debug text.
- List the questions a visitor has: the genre, the view, what the player does and what is new.
- Cut shots of 3 to 5 seconds that answer them. Put the core loop in the first seconds.
- Add variety in the middle: new areas, enemies, tools or modes. Show nothing more than three times.
- End on the game name and a wishlist prompt. Leave studio logos out.
- Watch it muted on a phone. Fix every shot that is not clear without sound.
- Export H.264 with AAC audio at 5,000 Kbps or more, and upload it days before you need it.
Sources: Steamworks Trailers documentation; Game Developer, Derek Lieu (19 April 2021).
How do I measure if a new trailer brings more wishlists?
Compare the wishlist rate of the page before and after the change. Steam does not report trailer views in its traffic report. It reports impressions, visits and the click-through rate from impressions to visits. So measure the trailer by what visitors do on the page: add the game to their wishlist.
Change one thing at a time, and keep 14 days on each side when you can. A sale, a festival or a creator video in the same window changes the visitors, not only the trailer. Mark those days and leave them out.
For tagged traffic, use the Steamworks UTM report. It shows wishlists per tracked visit for each link. If your own posts and ads keep the same UTM values before and after the change, the wishlist rate on those rows is a cleaner test, because the source of the visitors stays the same.
| Number | Formula | Where to get it |
|---|---|---|
| Page wishlist rate | Wishlist adds / store page visits | Steamworks wishlist and traffic reports |
| Tracked wishlist rate | UTM wishlists / tracked visits | Steamworks UTM Analytics, per link |
| Click-through rate | Visits / impressions | Steamworks traffic report |
| Change | Rate after / rate before, minus 1 | Our arithmetic on the two windows |
Sources: Steamworks Store and Platform Traffic Reporting documentation; Steamworks UTM Analytics documentation.
How do I see the effect of a trailer next to my other data?
Manalens is the analytics and growth engine built for games. Import the Steam UTM report under Settings, Integrations, Steam, and group Steam rows by source, campaign or content in Explorer. Then compare the wishlist rate of the same links before and after the new trailer.
Sources: Manalens product documentation.
Frequently asked questions
Should my first Steam trailer be a cinematic?
No. Valve highly recommends that the first trailer is primarily gameplay with the HUD visible. Steam plays the first two trailers before any screenshots and builds its six-second microtrailers from the first one. Put a cinematic or story trailer second, after the gameplay trailer, if you have one.
What resolution and bit rate should I upload?
Valve asks for the best quality you have, up to 1920 x 1080, at a bit rate of 5,000 Kbps or more. H.264 video with AAC audio is preferred, at 30 or 60 fps. Use a 44 kHz or 48 kHz audio sample rate, because odd rates are a common cause of failed uploads.
Can I edit the Steam microtrailer?
No. Steam makes the microtrailer for you as a six-second loop of six one-second clips from the first visible trailer, and you cannot customize it. To get a good microtrailer, make sure the first trailer shows clear gameplay all the way through, with no long menus, logos or black frames.
How do I know if a new trailer worked?
Compare the wishlist rate of the store page for about 14 days before and after the change, and leave out days with a sale, a festival or a big creator video. For tagged links, compare the UTM wishlist rate of the same sources. Change only the trailer during the test.
Sources and implementation
- Steamworks documentation: Trailers (Valve, read 18 November 2026) ↗
- Steamworks documentation: Store and Platform Traffic Reporting (Valve, read 18 November 2026) ↗
- Steamworks documentation: UTM Analytics (Valve, read 18 November 2026) ↗
- GameDiscoverCo: Game trailers, breaking down a key discovery mistake (Simon Carless, 19 September 2022) ↗
- Game Developer: The simplest trailer to make for your Steam page (Derek Lieu, 19 April 2021) ↗
- Game World Observer: Common mistakes devs make when creating game trailers (Evgeny Obedkov, 22 September 2022) ↗